http://www.audioropa.com/en/products/rf-transmission-systems/xepton/repeater-rp-1/

Stationary repeater »xepton« RP-1

The stationary repeater RP-1, a signal amplifier, extends the range of the audio transmission system »xepton« in connection with the stationary transmitter, transmitter T1 by approx. 400 meters each. Each transmitter T1 can be cascaded with a maximum of 10 repeater units and thus open up a range of up to 1000 meters.

A rack mount kit and remote antennas are available for rack mounting.

Technical data

Device type: Repeater
Dimensions (H x W x D): 37 x 230 x 124 mm
Weight: 390 g
Radio frequency type: ISM 2403 - 2480 MHz
Transmission mode: ISM 2.4 GHz FSK modulation with frequency hopping
Transmission power: Maximum 10 mW
Voice codec: 16bit / 8 KHz
RX sensitivity: -95 dBm
Delay: < 35 ms
Data rate: 2 Mbps
Frequency width: 2 MHz
Power supply: USB 5V/DC / 1A
Power consumption: 400 mA
Range: up to 150 m
Frequency response: 50 Hz - 7 kHz

Standard scope of delivery:

  • xepton RP-1
  • Storage soft case
  • USB power supply and cable
Stationary repeater "xepton" RP-1

A-5231-0, a52310, 5231