http://www.audioropa.com/en/products/induction-loop-systems/pro-loop-dccplus/

The »Pro Loop DCCplus« feeds inductive audio signals into large loops

The Pro Loop DCCplus proves to be the ideal solution for supplying inductive audio signals to event and meeting rooms.

Each of the two XLR(F) inputs can be configured as LINE (symmetrical) or as microphone input (asymmetrical).

The equipment provides an output of up to 12 A RMS and guarantees secure transmission of audio. The Automatic Gain Control hereby ensures good sound reproduction at a constant field strength and high stability.

For standard and low overspill supply

Beyond the standard application, the Pro Loop DCCplus is also suitable for setting up low overspill loop systems. This requires two Pro Loop DCCplus devices. The devices are connected via the integrated jack sockets “Slave In” and “Slave Out”.

  • Simple and safe handling
  • High output current: 12 A RMS
  • Main transfer switch 115 / 230 V AC
  • Active protection against short circuits
  • Two XLR(F)-sockets configurable as Microphone input (amplifier setting, phantom feed) or LINE-input (amplifier setting)
  • 100-V-priority input for the connection of ELA systems
  • Separate treble/bass regulation
  • Display of loop current
  • 6.3-mm-headphone socket for monitoring the audio output
  • Control to reduce metal losses
  • Suitable for the set-up of low overspill systems
  • 19” rack casing

Technical data

Main connection: 230 V AC, 45-60 Hz, 150 Watt
Passive protection: Fuse 1.5 A
###Induction loop output  
Max. current: 12 A RMS / 33.9 A peak-to-peak, 1-5 ms, 1 kHz
Max. voltage: 31.1 V RMS / 88 V peak-to-peak
Outputs-AGC: Sets the voltage and current for continuous signals such as oscillation and sinus curves to -10 dB after 0.6-1 seconds. Short pulses and normal program signals are not limited.
Frequency range: 100 – 5.000 Hz (±3 dB)
Distortion: < 1 %
Cable connection: 2 screw terminals on the reverse of the device
###Outputs  
Slave: SLAVE OUT, 0° - 90° phase shift adjustable, 6.3 mm jack plug
Induction loop monitoring: 1 headphone output
###Inputs  
IN 1: XLR(F) socket, microphone input symmetric, sensitivity 1 mV
IN 2: XLR(F) socket, can be switched as a microphone or line input
Slave: SLAVE IN, 6.3 mm jack plug
$$$100-V priority input for connection to PA systems  
###AGC  
Dynamics: > 36 dB
###Control and display  
Induction: loop setting: Rotary knob
Input level: IN 1 and IN 2 can be set separately
Display: Main connection: 1 green LED***Input level 6 different coloured LEDs***Current: 6 different coloured LEDs
###Housing  
Dimensions: 90 x 430 x 270 mm (H x W x D), 19-inch rack (2 height units)
Attachment: 4 attachment points on the front plate for installation in 19-inch rack
Colour: black
Weight: 9.3 kg
Pro Loop DCCplus

A-4264-0, a42640, 4264