Portable loop case set

The portable loop case set contains a complete mobile inductive loop system. The set includes the loop driver Pro Loop C, two cable reels with 20 metres of loop cable each, the field strength meter Pro Loop FSMplus, a test CD as well as various connection leads and tools. The system is easy to set up and is ready for use in just little time - ideal for temporary setups.

Please note: There is no microphone included in the set. We recommend for example the table top microphone or the wireless microphone sets UHF101 or UHF401.


Size HxWxD: 220 x 615 x 350 mm
Weight: 9,9 kg
Max. current: 4,8 A RMS / 13,6 A peak-to-peak, 1-5 ms, 1 kHz
Max. voltage: 31 V peak
Output AGC: Sets voltage and power for steady signals like oscillation and sine curves after 0.6-1 seconds to -10 dB. Short pulses and normal program signals are not limited.
Frequency response: 100 - 5000 Hz ( ± 3 dB)
Distortion: < 1%
Cable connection: Screw connection on rear panel of the amplifier
LINE OUT: 0 dBm-RCA out (with AGC function)
Induction loop monitoring: 6.3 mm jack for headphone connection
IN 1 and 2: 0.5 mV-100 mV / 10 kΩ (mic.) alt. 25 mV - 4 V/ 10 kΩ (line) AGC, switchable phantom voltage, XLR connections
IN 3: 50 mV-10 V / 10 kΩ, RCA connection
Dynamics: > 70 dB
Rise time: 2 - 500 ms
Fall time: 0,5 - 20 dB/s
###Controls and displays  
Treble control: 0 - +9 dB, potentiometer
Induction loop adjustment: 0 - 170 m², potentiometer
Displays: Mains connection: 1 green LED, Input level: 1 green LED , Induction loop power: 1 green LED
Portable loop case set