http://www.audioropa.com/en/products/induction-loop-systems/accessories/

PROLOOP FSMplus – Measuring device for induction loop systems

 

The PROLOOP FSMplus is a mea­suring device that measures the magnetic field strength of induction loop systems according to IEC 60118-4:2006 and BS 6083, Para. 4. The device delivers reliable RMS values on the output level, response frequency, AGC function (Automatic Gain Control), distortion and background noise in the induction looped tested. In addition, it enables the user to make an acoustic evaluation of the sound using signal reproduction via earphones.

Features

  • Compliant with IEC 60118-4:006 and BS for testing equipment used to evaluate induction loop systems.
  • True RMS: 125 ms average time
  • Crest factor: 3
  • A filter
  • Measuring range: +6 dB ...-40 dB (0 dB = 400mA/m)
  • Power supply: 2 x 1.5V AA batteries, long battery life
  • Display: Battery status control via LED
  • Field strength: via LED-scale (approx. 1 dB resolution)
  • Headphone jack with volume control
  • Dimensions (W x H x D): 83 x 126 x 35 mm
  • Weight: approx. 170 g (incl. batteries)

Technical informations

PROLOOP FSMplus

Wireless UHF101 microphone

The wireless UHF101 microphone set (PLL) can be used in combination with any of the HUMANTECHNIK transmission systems.

The set consists of a handheld transmitter microphone and the receiver, which conveys the received microphone audio via cable to further audio equipment (PA-systems, loop amplifiers etc).

Technical data

RF transmission frequency 16 frequencies in the range from 863 to 864 MHz
Frequency stability ±0.005 %, PLL synthesized circuit
Modulation FM
Range Up to 100m
Distortion factor 0,4%
Audio frequency response 60 to 21.000 Hz, -3dB
###Receiver  
Reception type Dual antenna, PLL
Noise suppression > 90 dB
Audio output XLR or 6,3 mm
Power supply DC 22V / 400mA (AC/DC adapter included)
###Transmitter  
Transmission power 10 mW
Power supply Alkaline / NiMH batteries 2xAA
Operating time 6 - 8 h
Wireless UHF101 microphone

Wireless UHF401 microphone

The 4-channel UHF401 microphone system is designed for use anywhere where up to four different speakers talk from different locations, in churches, for example.

Four independent handheld transmitter microphones send the voices wirelessly to the stationary receiver, which in turn feeds the signals via cable into further audio systems, such as PA-systems, inductive loop amplifiers or an infrared or radio-frequency transmitters.

Technical data

RF transmitting frequency 16 frequencies in the range from 823 to 832 MHz
Frequency stability ±0.005 %, PLL synthesized circuit
Modulation FM
Range Up to 100m
Distortion factor 0,4%
Audio frequency response 60 to 21.000 Hz, -3dB
###Receiver  
Reception type Dual antenna, PLL
Noise suppression > 90 dB
Audio output XLR or 6,3 mm / Composite signal 6.3 mm
Power supply DC 22V / 1,2A (AC/DC adapter included)
###Transmitter  
Transmitting power 10 mW
Power supply Alkaline / NiMH batteries 2xAA
Operating time 6 - 8 h
Wireless UHF401 microphone

S/PDIF Audio converter

 

The S/PDIF converter (operation with power supply unit) converts digital signals of respective audio sources into analogue signals, allowing their further processing by systems with analogue input.

S/PDIF Audio converter

Portable pocket transmitter

Portable pocket transmitter with PLL microphone (to be used with the UHF101 set). The handy transmitters can be worn directly on the body. The speaker then simply clips the microphone to his/her collar to have both hands free.

Portable pocket transmitter

Induction loop pad

The »pad« contains a small loop. It is connected directly to the LA-240 or LA-60 induction loop amplifier and placed under the seat cushion or behind the back of a chair. The connection cord for the pad is 4.50 m long. As a result, the signal coverage can be restricted to a very small area.

Induction loop pad

Small »Cross-the-counter« induction loop

The small »Cross-the-counter« induction loop has been designed to supply induction loop signals to small areas, such as individual service points or reception desks. The system is installed – generally underneath the table top – using adhesive clamps with a space requirement of approx. 35 x 35 cm; recommended induction loop amplifier: LA-60, LA-70 or LA-240

Small »Cross-the-counter« induction loop

Table microphone

  • needs 2 AA batteries
  • with XLR plug connection

Table microphone

»EH1205« replacement microphone

Directly connected to the induction loop amplifier, the microphone provides a speaker with ample freedom of movement in close dialog with four meters of cable and a clip. It can also be ordered separately as a replacement microphone or a second microphone to be connected to the second microphone jack.

Microphone EH1205

XLR(M) adapter cord - 3.5 mm jack

e.g. to connect to CD players or stereo systems

XLR(M) adapter cord - 3.5 mm jack

XLR(M) adapter cord - 6,3 mm jack

Connection of 1-channel- (UHF101) or 4-channel- (UHF401) microphone systems.

XLR(M) adapter cord - 6,3 mm jack

XLR(F) adapter cord - 3,5 mm jack

For the connection of the table microphone to the LA-90 or LA-240.

XLR(F) adapter cord - 3,5 mm jack

RCA connection cord

e.g. to connect TV or stereo systems

RCA connection cord (length 3 m)
RCA connection cord (length 6 m)

XLR connection cord

For connecting a PROLOOP loop amplifier to an existing sound system.

XLR connection cord (length 2 m)
XLR connection cord (length 6 m)

Copper ribbon cable - insulated

Copper ribbon cable, roll 50 m, 21 x 0,4 mm (cross section 5,4mm²)
Copper ribbon cable, roll 100 m, 21 x 0,4 mm (cross section 5,4mm²)
Copper ribbon cable, roll 100 m, 21 x 0,1 mm (cross section 1,8mm²)

Adhesive loop marking tape, 50 m

The marking tape is intended to indicate the location of loop cables and conductors hidden underneath concrete or other floor materials.

Especially for buildings undergoing construction or renovation, the tape can help to avoid unintended damage to the loop cables, as can be caused by various tools.

Length per roll: 50 metres

 

 

Specifications

Material: PE-foil with fibre mesh reinforcement
Colour: orange red
Adhesive layer: Hot-Melt-Gum (synthetic rubber)
Strength: 190 μm
Length per rolle: 50 metres
Width: 50 mm
Adhesive loop marking tape

A-4291-0, a42910, 4291, A-4450-0, a44500, 4450, A-4455-0, a44550, 4455, A-4963-0, a49630, 4963, A-4460-0, a44600, 4460, A-4910-0, a49100, 4910

A-4917-0, a49170, 4917, A-4495-0, a44950, 4495, EH1205-0, eh12050, 1205, A-4933-0, a49330, 4933, A-4939-0, a49390, 4939, A-4934-0, a49340, 4934, A-4906-0, a49060, 4906

A-4907-0, a49070, 4907, A-4935-0, a49350, 4935, A-4936-0, a49360, 4636, A-4937-0, a46370, 4937, A-4948-0, a49480, 4948, A-4949-0, a49490, 4949, A-4956-0, a49560, 4956