»xepton«: 2,4-GHz-transmission for more versatility within tour-guiding and team-teaching applications – economic, easy to use and powerful.

»xepton« – The 2.4 GHz communication- and tour-guide system for that deciding amount of application quality

With the 2.4 GHz frequency band, the communication- and tour guide system »xepton« uses the currently highest available quality in ways of wireless transmission: High bitrates without loss through compression. The result: Excellent quality and clarity of sound and a vastly reduced sensitivity for interference - in contrast to other transmission technologies. Furthermore, »xepton« offers you great versatility together with an easy-to-use concept.

Key Features:

  • Easy to use, can be operated by anyone
  • Worldwide compatibility due to restriction-free 2.4 GHz transmission
  • Fully digitalized crystal clear sound quality
  • Large transmission range of up to 300 m
  • Up to 20 hours of use per battery charge
  • Convenient charging via micro-USB or multiple charging stations
  • Excellent speech understanding - even in noisy and harsh environments
  • Enormous application flexibility due to unidirectional and bidirectional applications
  • Flexible connection of audio components such as headsets, headphones or telescopes for inductive direct transmission to hearing aids or cochlear implant systems
  • The performance of "xepton" is precisely focused on the requirements of high-quality tour guide and two-way-communication applications and is in no way oversized. This makes "xepton" significantly more affordable than comparable systems from other brands.

Typical tour-guide-configuration – also for people with impaired hearing

xepton TX-1 transmitter TX-1

A small but powerful transmitter with connectors for headsets and microphones provides for typical unidirectional applications. Once switched on, the device is instantly ready to use and the LC-Display informs about the current state. Should adjustments be necessary, only three buttons are needed to browse and set the menu-guided options. The maximum signal range is – depending on the surroundings – up to 150m and the transmission time per battery charge is approximately 20 hours.

Order No.: A-5211-0

Manual + Addendum 2017

»xepton« transmitter TX-1, specifications
Dimensions 85 x 50 x 15 mm (H x W x D)
Weight  66 g
Frequency type  ISM 2403 - 2480 MHz
Transmission mode ISM 2.4 GHz FSK modulation with frequency hopping
Transmission power Maximum 10 mW
Latency < 30 ms
Data rate 2 Mbps
Power LI-ION 3,7 V / 1100 mAh
Talk time 20 hours typical
Range up to 150 m

Scope of delivery:

  • xepton TX-1
  • plug-in microphone PM-01
  • belt clip BC-1
  • USB-charging cable
  • neck strap
  • user manual
  • warranty card

»xepton« RX-1, receiver

The according receivers, also equipped with an LC-display, sport two audio-out ports for the connection of various listening components, for example head- or earphones. It is also possible to connect neck loops - these convey the transmitted audio to accordingly equipped hearing aids via induction. This makes it possible for hearing impaired people to hear the tour guide with their own hearing aids at their own preferred volume, less disturbed by distracting environmental sound.

Order No.: A-5221-0

Manual + Addendum 2017

»xepton« receive RX-1, specifications
Dimensions 85 x 50 x 15 mm (H x W x D)
Weight 66 g
Frequency type ISM 2403 - 2480 MHz
Transmission mode ISM 2.4 GHz FSK modulation with frequency hopping
RX-sensitivity -95 dBm
Latency < 30 ms
Data rate 2 Mbps
Power LI-ION 3,7 V / 1100 mAh
Listening time 20 hours typical

Scope of delivery:

  • xepton RX-1
  • In-Ear earpones ER-01
  • belt clip BC-1
  • USB-charging cable
  • neck strap
  • user manual
  • warranty card

... plus a heavy-duty-transceiver

Transceiver »xepton« TRX-1

The typical configuration of tour guide systems, with one transmitter and several receivers, can be expanded at will by the »xepton«-system’s special transceiver. This transceiver, a heavy-duty device, is very resistant against mechanical shocks, dust and splash water, making it an ideal all-weather piece of equipment.

The »xepton«-transceiver serves as a basic device for bidirectional applications, also for tour guide applications with a communication function or for the task of team-teaching. Up to three of these transmitter/receiver-units can simultaneously transmit within a group, and up to 40 groups are possible, each group being able to contain up to 100 paired units. Usage is »xepton«-typically easy, thanks to the options menu displayed on the LC screen.

Order No.: A-5200-0

Manual

»xepton« Transceiver TRX-1, specifications
Dimensions 98 x 49 x 17 mm (H x W x D)
Weight 88 g
Frequency type ISM 2403 - 2480 MHz
Transmission mode ISM 2.4 GHz FSK modulation with frequency hopping
Transmission power Maximum 10 mW
Voice codec 16bit / 16 KHz
RX-sensitivity -95 dBm
Latency < 35 ms
Data rate 2 Mbps
Frequency bandwidth 2 MHz
Power LI-ION 3,7 V / 1100 mAh
Antenna Internal helical antenna
Talk time 10 hours typical
Power consumption 100 mA
Range up to 150 m
Frequency response 50 Hz - 7 kHZ
Max. number of transmitters 3 per group (incl. master transmitter)

Scope of delivery:

  • xepton TRX-1
  • headset HSB-01
  • soft carry case
  • USB-charging cable
  • neck strap
  • user manual
  • warranty card

Stationary transmitter »xepton« T-1

Image T-1The transmitter T-1 is ideal for stationary applications.

With its transceiver functions, the T-1 can be used for communication in two directions and, just like the TRX-1, can be utilized for use in tour-guide systems. Up to three transceiver units (TRX-1 or T-1) can send simultaneously within a channel group. It is possible to have 40 channel groups with a total of 100 transceivers each and an unlimited number of receivers. Using it is as easy as with all the other »xepton«-devices.

A rack-mounting kit with remote antenna is in development and will be available soon.

Order-No.: A-5230-0

Manual

»xepton« Stationary transmitter T-1, specifications
Dimensions 37 x 230 x 124 mm (H x W x D)
Weight 390 g
Frequency type ISM 2403 - 2480 MHz
Transmission mode ISM 2.4 GHz FSK Modulation with frequency hopping
Transmission power 10 mW max
Voice codec 16bit / 16 KHz
RX-sensitivity -95 dBm
Latency < 35 ms
Data rate 2 Mbps
Frequency bandwidth 2 MHz
Power Micro-USB-power supply 5 V
Antenna External antenna
Power consumption 100 mA
Range up to 300 m
Frequency response 50 Hz - 7 kHZ
Max. number of transmitters 3 per group (incl. master transmitter)

Scope of delivery:

  • xepton T-1
  • Soft-shell carry case
  • USB-power supply and cables

Extensive accessories

The scope of delivery of all »xepton«-units contains everything needed for instant use, which includes – depending on the type of device – headset, earphones, USB charging cables, neck straps or belt clips.

Furthermore, a wide selection of accessories is offered:

Accessories

Plug-In microphone PM-01 (pict. 1)
Order No.: A-5263-0
Plug-in microphone for transmitter xepton TX-1.

Microphone headset HSB-01 (pict. 2)
Order No.: A-5270-0
Microphone headset for transceiver xepton TRX-1, mit head clip and padded loudspeaker. Weight including cable: 64 g

Leather carry case CC-01 (pict. 3)
Order No.: A-5290-0
Protective case to comfortably wearing the xepton TRX-1. Transceiver not included. Net weight: 36 g

Arm band holder AM-01 (pict. 4)
Order No.: A-5292-0
For xepton TX-1 und RX-1. Worn around the arm, velcro fixing.

USB cable UC-01 (pict. 5)
Order No.: A-5261-0
Charger cable with USB-A und USB micro-B-connectors. Length 1 m.

Earphone EHE-01 (pict. 6)
Order No.: A-5281-0
Single-sided earphone with ear loop. Weight: 12 g

RP-1 Stationary repeater / transmitter
Order No.: A-5231-0
Stationary transmitter for expanding the transmission range. Available from Autumn 2017

RCB-20 20-bay charging bag
Order No.: A-5250-0
Charging bag for 20 LI-ION rechargeable batteries of device types xepton TX-1 and RX-1.

CB-20 20-bay charging case
Order No.: A-5251-0
Charge- and carry case for 20 pieces xepton TX-1 or RX-1.

MCB-10   10-bay charging case
Order No.: A-5252-0
Charge- and carry case for 10 pieces xepton TRX-1.

DC-20   20-bay drop-in charging case
Order No.: A-5253-0
Drop-in charge- and carry case for 20 pieces xepton TX-1 and RX-1

DC-40   40-bay drop-in charging case
Order No.: A-5254-0
Drop-in charge- and carry case for 40 pieces xepton TX-1 and RX-1

xepton LI-ION for TX-1 und RX-1
Order No.: A-5260-0
Rechargeable battery for xepton TX-1 and RX-1. LI-ION 3,7 V / 1100 mAh

USB-power supply
Order No.: A-5262-0
Power supply with USB-A- connector. Mains adapter for EU, US, CA und Australia included.

Clip-on microphone CM-01
Order No.: A-5264-0
Microphone with clip, for fastening on clothing. Cable length: 110 cm

Microphone headset EBB-01
Order No.: A-5271-0
Microphone headset for transceiver xepton TRX-1, with earloop. Weight including cable: 22 g.

EHR-01 Microphone headset
Order No.: A-5272-0
Microphone-headset for transceiver xepton TRX-1, with In-Earearphone.

ER-01 In-ear earphones
Order No.: A-5280-0
In-Ear-earphones for xepton RX-1. Cable length: 125 cm

Belt clip BC-01
Order No.: A-5291-0
Holder with belt clip for xepton TX-1 and RX-1. Net weight: 25 g


Service:

Please use our consultancy service for the ordering and configuration of components for your application:
Your contact person